shaft-hub-connections – Professur Maschinenelemente und Produktentwicklung

Turning a Conventional Machine Part into a Smart Enabler for Condition Monitoring

11. September 2025

Benjamin Muhammedi

This study [1] introduces the sensor-integrating feather key (SiFK), a smart machine element that enables direct, calibration-free measurement of transmitted circumferential forces and torque in feather key connections. Through topology optimization and targeted stiffness design, the geometry is adapted so that only a minimal number of strain gauges are required to capture the complete deformation…
Read More

Categories: News-Englisch

Tags: IKAT, sensors, shaft-hub-connections
International Conference on Multiaxial Fatigue and Fracture (ICMFF14)

1. Juli 2025

Benjamin Muhammedi

The failure of components as a result of crack initiation and growth is no coincidence, but follows physical laws. Understanding these laws – especially under multiaxial, non-proportional loading and the complex phenomenon of fretting fatigue – is the subject of current research. The International Conference on Multiaxial Fatigue and Fracture (ICMFF14), which took place from…
Read More

Categories: News-Englisch

Tags: Coefficient of Friction, Fretting Fatigue, IKAT, shaft-hub-connections
Fretting fatigue on bearing seats

23. Juni 2025

Benjamin Muhammedi

Fretting fatigue is a frequent cause of damage in bearing seats of large shafts. The phenomenon has its origin in tribological damage, which is characterised by reversing slip movements in the micrometre range. This tribological damage has a strength-reducing effect, whereby the strength reduction is significantly influenced by the parameters slip amplitude and contact pressure.…
Read More

Categories: News-Englisch

Tags: bearing seat, Fretting Fatigue, IKAT, shaft-hub-connections
IKAT presents innovative teaching concepts at Chemnitz University of Technology’s Open Day

16. Mai 2025

Benjamin Muhammedi

On 10 May 2025, the Institute of Construction and Drive Technology (IKAT) presented itself as part of the Open Day at Chemnitz University of Technology with two interactive formats: the shadow building game and the MUT Lounge.The shadow building game offered visitors the opportunity to playfully test their spatial imagination. The starting point was a…
Read More

Categories: News-Englisch

Tags: bearings, IKAT, MUT, shaft-hub-connections
Design method for inner knurled interference fits

1. April 2025

Benjamin Muhammedi

In the research project FVA 956I ‘Design Method for Internal Knurled Interference Fits’, detailed investigations were undertaken into the static and cyclical transmission behaviour of internal knurling press fits. This shaft-hub connection is characterized by pressing a hardened hub with internal knurling onto an oversized, softer shaft, creating a form-fit and friction-fit contact zone. The…
Read More

Categories: News-Englisch

Tags: IKAT, inner-knurled-press-fit-connection, shaft-hub-connections
Presentation of current research at shaft-hub-connections working group

29. November 2024

Benjamin Muhammedi

IKAT presented the latest research results at the shaft-hub-connections working group, consisting of research centres and industry representatives, in Frankfurt am Main. Topics of various positive and frictional shaft-hub connections were presented in the context of their application. The results triggered lively discussions and form the basis for future applications. We would like to thank…
Read More

Categories: News-Englisch

Tags: feather key connection, IKAT, knurled press fit connection, press fit, shaft-hub-connections
IKAT presents sensorintegrating feather key

2. Oktober 2024

Benjamin Muhammedi

At this year’s SiME Congress, the IKAT presented an innovative machine element: the sensor-integrated key. This novel key is capable of directly measuring the torques acting on it and wirelessly transmitting the data to computers or smartphones. It offers great potential for future applications, particularly as an early warning system for detecting overloads. This development…
Read More

Categories: News-Englisch

Tags: feather key, in-situ measurement, sensor-integrating feather, shaft-hub-connections
Multiaxial fatigue in contacts

3. Juni 2024

Benjamin Muhammedi

The research issues associated with the fatigue strength of multi-axially loaded shaft-hub-connections (WNV) combine two important core topics that are continuously addressed at IKAT. On the one hand, complicated stress states, so-called non-proportional stresses, occur at the point of failure, which can only be evaluated using special strength hypotheses. In addition, tribological influencing variables, such…
Read More

Categories: News-Englisch

Tags: multiaxial fatigue, shaft-hub-connections
13th SAXSIM Conference: New insights into the strength of deep-rolled components presented

20. März 2024

Benjamin Muhammedi

At the 13th SAXSIM Conference in Chemnitz, Mr. Muhammedi presented a lecture on „Numerical Investigations into the strength of deep-rolled components under cyclic loads.“ The project, involving three research institutes – IKAT, IMM, and IF – focuses on analyzing the strength of deep-rolled components under cyclic loads through numerical simulations. Mr. Muhammedi explained the methods…
Read More

Categories: News-Englisch

Tags: Fatigue, shaft-hub-connections, shafts, strenght
Diploma thesis on the topic of external knurled press-fit connection

5. März 2024

Benjamin Muhammedi

On 1 March 2024, Mr. Maik Zylla successfully defended his diploma thesis in front of an expert examination committee headed by Prof. Hasse. In his thesis ‚Investigation of the joining and torsional behaviour of combined press-fit and form-fit shaft-hub connections using the example of the external knurled press-fit connection‘, useful extension approaches for existing design…
Read More

Categories: News-Englisch

Tags: diploma, shaft-hub-connections, thesis
10. VDI Fachtagung „Welle-Nabe-Verbindungen“

16. Februar 2024

Benjamin Muhammedi

The 10th Symposium „VDI Fachtagung Welle-Nabe-Verbindungen“ (external link) which deals with shaft-hub-connections will take place on 6 & 7 November in Garching near Munich. All topics relating to the wide range of shaft-hub connections will be presented at this conference, with a particular focus on design/dimensioning, strength verification, production and application, as well as current…
Read More

Categories: News-Englisch

Tags: Fretting Fatigue, shaft-hub-connections, strength